EVT 5208 RM Stereo Mixer


[ Follow Ups ] [ Post Followup ] [ TAPCO web forum ] [ FAQ ]

Posted by Kevin Bisher (63.77.52.190) on January 13, 2002 at 07:32:41:

I recently aquired an EVT 5208 mixer and all of it is in great shape and in working order (apparently). The only thing wrong with it were a few scratchy pots and after a cleaning the mixer sounds great! Nice work by those of you who built these!

My biggest question at the moment is that the mixer has inserts on all 8 channels and inserts on the L and R Subs. I have tried "inserting" a stereo effects device through all of the channels using the proper wiring for the inserts coming from the effects device but get no effect output to the channel(s inserted to). The device shows that it's getting input but iget nothing coming out. If I route the device to a Lo Z input without using the insert the device works fine. I'd really like to use the inserts if possible.

Could there be something wrong with the insert circuitry or am I just not connecting the thing correctly?

Using the insert, I am connecting it as follows...

Effects processor input connected to TRS connector Ring and the processor output is connected to the tip with all grounds connected to the sleeve.

Any help would be greatly appreciated!

Thanks,
Kevin


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ TAPCO web forum ] [ FAQ ]