I changed out the Chiller cooling system in this cellar for a DX system.

Evaporator in. Lineset at left. Control dangling.

The lineset went through a new drilling under the evaporator.

This was then boxed in with locally obtained redwood.

I used the floor drillings from the chiller lines for the evaporator drain. I constructed a shelving unit to fill the hole in the racking left by the outgoing chiller heat exchanger. One side panel of the cabinet is in the foreground.

Cabinet installed. The customer was thinking about a granite top so I cut a fabrication template and left clearance to the racking.

Construction of curved evaporator screen using scap material from racking arches.

The customer later requested doors for the shelving unit and I made up a face frame/door assembly in my shop and one of the installers placed it when he was next in the area.