San Francisco America’s Cup

My family and I attended the America’s Cup Races in July and September of 2013.

auld mug

We saw the “auld mug” at the Seattle Yacht Club in June 2013.

family at America's Cup Race

Sailing to the America’s Cup Race on San Francisco Bay on my sister’s boat “Ahelani.”

America's Cup Race 2

AC 45.

America's Cup gate America's Cup Race AC 1 AC 2

42 thoughts on “San Francisco America’s Cup

    • It was the 2010 America’s Cup match, raced under the terms of the Deed of Gift that brought non-manual power into racing for the Cup. The Defender took the opportunity available to it under World Sailing’s Racing Rules of Sailing, to relax the manual power rule (which it routinely did anyway for some of its racing on Lake Geneva).

      This was objected to by the Golden Gate Yacht Club, but it lost this argument in the New York Supreme Court and Golden Gate was forced to belatedly add an engine to help power its yacht. Both yachts raced the 2010 match with a small engine providing additional non-manual power to help sail their huge multihull yachts.

  1. Global Vision for America’s Cup

    “It should be more like Formula One, where you have races all around the world and all the races count toward the Championship.” Larry Ellison in 10 March 2014 San Francisco Chronicle.

    regattas all over the world, Louis Vuitton Cup then America’s Cup in Honolulu is the current Vision. AC45s followed by AC60s but no AC72s as those are overly expensive.An Atlantic Division and a Pacific Division with division championships in Port of Rome and Shanghai.

    “Sports that don’t make money are just hobbies for rich guys.”

  2. Incidents in the 1880s involving American center boarders were used to discourage there use in America’s Cup races. “Cutter cranks” claimed that capsizing was not possible with the deep draft British “keel” boats and that view prevails more or less even today.

    SV Murrelet side view
    Murrelet is a center boarder though this is not readily apparent. A centerboard is daggerboard that cuts down the middle of the vessel. Our cruiser avoids cutting accommodations down the middle through a power boat like raised navigation area. The rudders serve as leeboards, another kind of daggerboard, meaning that they, like the centerboard, also hold the vessel from being pushed with the wind. For the most part Murrelet “goes where she looks” but I notice some drift, like a plane in a cross wind. The three daggerboard foils are effective in winds of 17 knots for upwind pointing and on other points of sail in much higher winds (bufourt 7)

    When Murrelet is close hauled, excessive leeway is usually the result of an overpowered main. Experienced keelboat sailors have a hard time with this and insist on telling us to pull the boom in as close to the centerline as possible to race into the wind, as would be done on a keelboat. But what this does on a centerboarder is put power in the main sail and that power is one that is lateral. Easing the main puts the power back in the genoa where the power is more to the windward. In winds over 17 MPH having both rudders in the water reduces leeway.

Leave a Reply to mighetto Cancel reply

Your email address will not be published. Required fields are marked *

The maximum upload file size: 8 GB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here

This site uses Akismet to reduce spam. Learn how your comment data is processed.